logo
অনলাইন পরিষেবা

How to Verify Agarwood Authenticity When Buying Wholesale from China

2026/11/18

সম্পর্কে সর্বশেষ কোম্পানির খবর How to Verify Agarwood Authenticity When Buying Wholesale from China

Direct answer: Verify in three layers, cheapest first. Documents (CITES permit, accredited lab report, SDS for oils and fragrance compounds) tell you what the material claims to be. Physical tests (cut face, water density, burn behaviour, drill-hole inspection) tell you what it is. Sampling discipline — testing the actual shipping lot rather than a showroom piece — tells you whether the two are the same thing.

Most buyers skip the third layer. That is where the money is lost, because the material in the sample is rarely the material in the container.

What does "fake agarwood" actually mean?

The word covers at least five different problems, and they need different defences:

Problem What it looks like How it is caught
Species substitution A cheaper Aquilaria or non-Aquilaria wood sold as the premium species Lab identification; documentation chain; scent reference
Resin impregnation Wood soaked or pressure-treated with resin or oil to raise density Cut face shows resin in the pores, not in the fibre; burn test gives a flat, chemical note
Dyed or stained wood Uniform dark colour, no oil-line structure Wipe test with a solvent-damp cloth; look at the cut face under light
Weighted beads Beads heavier than their size should allow Weigh a known count against a reference; drill-hole inspection
Grade inflation Genuine wood, honestly described, but graded up one band Test the shipping lot, not the sample; agree grade definitions in writing

Which documents prove what?

Documents do not prove scent, but they do prove process, and process is what a compliance team and a customs officer will ask about.

  • CITES export permit. Required for cross-border movement of Aquilaria material. It ties the shipment to a permit and an origin. Plantation origin is easier to document than wild collection, and the permit is usually the slowest document in the set for Gulf imports.
  • Accredited laboratory report. We test all product lines through CMA / CNAS / ILAC-MRA accredited laboratories and hold reports covering incense sticks, incense powder, sandalwood and oud oil. What to look for on a report: the sample description matches what you are buying, the test method is named, and the report is dated for the lot — not a generic certificate from three years ago.
  • EU SDS. Required in practice for oils and fragrance compounds moving into European and many Gulf markets. A supplier who cannot produce an SDS for an oud oil is not exporting at scale.
  • Halal certification. For Gulf retail, food-adjacent and religious-goods channels, buyers increasingly ask before listing. Our production is halal-certified, covering all product lines; certificate copies are provided by the sales desk rather than quoted in marketing material.
  • Certificate of origin and commercial documents. Ordinary, but inconsistent descriptions across invoice, packing list and permit are one of the most common causes of customs delay.

What can you test yourself, without a lab?

Six checks, cheapest first:

  1. Cut a cross-section. Resin in agarwood follows the fibre and forms lines around wounds. Resin poured or pressed in sits in pores and looks like a stain. This single check eliminates most impregnated material.
  2. Weigh it in water. Density above roughly 1 g/cm³ means sinking grade. Weigh rather than watch — a number tells you how close to the boundary the piece is.
  3. Burn 0.3–0.5 g. Genuine resined wood foams at the edge, releases oil, and the smoke carries the species character: sweet, balsamic, sometimes floral. Treated wood gives an acrid or solvent edge and leaves a hard, glossy residue.
  4. Smell the cold wood, then the warm wood. Warm a piece in your hand or in a closed container. Real agarwood releases scent slowly at body temperature; heavily oiled wood smells strong when cold and flat when hot.
  5. Inspect the drill holes on beads. Look for filler, colour breaks and grain that does not continue across the hole.
  6. Wipe with a solvent-damp cloth. Dye transfers. Natural colour does not.

How should you structure sampling on a first order?

The protocol that prevents most disputes:

  • Ask for the lot number in writing before you approve samples, and require that number on the shipping documents.
  • Request 100–200 g per grade from the shipping lot, with fresh cut faces, not a polished showroom piece.
  • Condition the sample in your own climate for 24–48 hours, then test. Agarwood that sinks in humid Guangzhou can float in dry Riyadh.
  • Keep a sealed reference piece from every approved lot. Scent memory is unreliable over weeks; a physical reference is not.
  • Video the production run. A short call showing the material being weighed and packed, with the lot tag visible, is worth more than another catalogue page.

Why does factory structure matter more than certificates?

  • Where is the material grown? Ours comes from a near 1,000-mu plantation and supporting factory in Conghua, Guangzhou — the base and the processing line are the same operation, which is why induction method and cycle can be stated per grade.
  • Which process produced the oil? Two routes exist and they behave differently: water distillation with 3–6 months of natural microbial fermentation, and supercritical CO₂ low-temperature extraction with no solvent residue. A supplier who cannot say which route a batch came from cannot answer a compliance questionnaire either.
  • Can they repeat the lot? The second order is the real test. Ask what the factory will do if the same grade arrives with a different scent profile.

Longsheng has grown, processed and exported agarwood since 2009, with an in-house grading and QC step before packing. Materials are quoted per specification and lot; export documents are issued under Guangzhou Longsheng International Import and Export Trading Co.

FAQ

How can I tell if agarwood is real before ordering wholesale?

Cut a cross-section and check that resin follows the fibre rather than sitting in pores, weigh the piece in water for density, burn a small fragment, and require an accredited lab report plus a CITES permit that match the lot you are buying.

What documents should a Chinese agarwood supplier provide?

A CITES export permit, an accredited laboratory report for the material, an EU SDS for any oil or fragrance compound, a certificate of origin, and a commercial invoice and packing list that describe the goods identically.

Can dyed or resin-soaked agarwood pass a sink test?

Yes — that is exactly why the sink test alone is not enough. Treated wood can be made dense enough to sink. A cut face, a burn test and a solvent wipe catch what density alone cannot.

How much does lab testing cost and who pays?

Testing is normally arranged by the supplier as part of QC, with the report supplied to the buyer. If a buyer wants an independent test on arrival, that is usually arranged and paid for locally, and it is worth doing once on a first container.

Is plantation agarwood easier to verify than wild?

Generally yes. Plantation material has a documented origin and induction method, and CITES documentation is more straightforward. Wild material is legally tradable but requires a longer paper trail, which is where most verification problems appear.

Do you provide samples from the actual shipping lot?

Yes. Samples are drawn from the lot that will ship, with cut faces, so the buyer can test density, burn behaviour and colour consistency before committing. Exact sample quantities and terms are quoted per specification.

What is the difference between a trading company and a factory in this trade?

A factory controls material, processing and grading in one operation and can state induction method, process route and lot history. A trading company resells and often cannot. Ask for a video walk-through of the base and the processing line.