logo
Online Service

Agarwood Prayer Beads with Custom Sizing: What Wholesale Buyers Should Specify

2026/11/18

Latest company news about Agarwood Prayer Beads with Custom Sizing: What Wholesale Buyers Should Specify

Direct answer: Custom agarwood prayer beads are quoted from a size mix, a strand count and a grade band — not from a single "bead" line item. Specify the bead diameter in millimetres, the strand length (33, 99 or 108 beads plus separator and tassel allowance), the shape, the drill diameter, and whether colour matching is per strand or per carton. Everything else is negotiable; those five items decide the price.

The reason so many bead orders arrive "close but wrong" is that sizing is treated as a finishing detail. In agarwood it is the main cost driver, because a 12 mm bead consumes roughly twice the material of an 8 mm bead from the same block — and that block is graded before it is cut, not after.

What bead sizes and strand counts are actually ordered?

Bead diameter Typical strand Material per strand Where it sells
6 mm 108-bead mala, 99-bead misbaha Low — offcut-friendly Souvenir and gift retail, entry price points
8 mm 99-bead misbaha, 108-bead mala Moderate Mainstream Gulf and Southeast Asian retail
10 mm 33-bead misbaha Moderate to high Mid-premium gifting, everyday misbaha
12 mm 33-bead misbaha High Premium gifting, corporate and Ramadan sets
14–16 mm 33-bead, statement pieces Very high — needs thick stock Collector and boutique retail

Two practical constraints sit behind that table. First, small beads are not automatically cheap if you want them uniform: cutting 6 mm beads from heavily resined material produces more waste per usable bead. Second, large beads need thick material. A 16 mm bead cannot come from a thin log or a shaving; it needs a block with enough solid, resined cross-section, which is why large-format strands are usually quoted from top grade bands only.

How is agarwood grade matched to bead work?

Beads are a density product as much as a scent product. The buyer sees colour, weight and how the surface takes a polish; the customer feels weight in the hand and hears the click between beads.

  • Floating / A grade — light, visible oil lines, good for volume programmes and 6–8 mm strands where colour uniformity matters more than density.
  • Half-sink — the workhorse grade for 8–10 mm misbaha. Enough resin to feel substantial and to darken with wear, without the waste of cutting top grade into small rounds.
  • Sinking grade — used for 12 mm and above, statement strands, and any product where the retailer will talk about resin in the sales pitch.
  • Turning offcuts — the most efficient input for beads is not a log at all. Qinan turning offcuts are graded separately and sold in kilo lots, which suits bead production far better than buying whole material and generating your own waste.

Our own Qinan turning offcut line (KBS01–03, 5A / 3A / A) and the Qinan incense-material line (KAC01–03) are quoted from a 1 kg minimum, which is the realistic entry point for a bead sample programme. Graded raw material from the Hainan range (HN-001 to HN-012) starts at 5 kg per grade when a buyer wants to control the cut themselves. For Gulf retail channels, production is halal-certified, covering all product lines.

What else changes the finished strand?

Five specification items decide whether your strand feels premium or generic:

  1. Shape. Round is standard; barrel, lotus and facet cuts change the labour and the waste. Barrel beads hide grain variation better; round beads expose it.
  2. Drill diameter. Standard stringing uses a fine drill, but a thicker cord, a leather thong or a knotted spacer needs a larger bore. Undersized bores are the most common cause of breakage complaints.
  3. Colour matching. Per-strand matching is achievable at most grades. Per-carton matching across hundreds of strands requires sorting from a single lot and should be agreed before production, not after.
  4. Separators and tassel. Silver, brass or wooden spacers, imam beads and tassel length are usually sourced by the buyer, but a factory that also assembles can pack a retail-ready strand. Decide who supplies what, in writing.
  5. Stringing. Elastic, silk thread and knotted-by-hand give three different price and durability profiles. Knotted strands take time; elastic strands fail in heat and humidity.

What are the common quality failures in wholesale bead orders?

  • Mixed lots in one strand. Visible as a colour step halfway along the strand. It happens when a factory tops up a run from a second bale to hit quantity.
  • Filler and putty. Small cracks filled and polished. Look at the drill hole and the bead's equator under a loupe; filler shows as a colour break with no grain continuity.
  • Over-polished soft wood. A high shine on a light bead is usually wax, not resin. It dulls in weeks.
  • Wrong bore for the cord. Causes returns, not complaints — buyers discover it at assembly.
  • Count errors. A 33-bead misbaha shipped as 32 plus a decorative imam bead is not a 33-bead strand. Specify whether the count includes separators.

How do you brief a supplier so the first run is right?

Send one page with five lines: diameter in mm (post-stabilization), strand count including or excluding separators, shape, drill diameter, and grade band with a reference photo. Add the packing format and the destination market. Ask for a pre-production sample strand from the shipping lot, not a showroom strand, and confirm colour-matching scope.

Longsheng has produced agarwood beads and carved pieces since 2009 from a near 1,000-mu plantation and supporting factory in Conghua, Guangzhou, cutting from its own graded material and Qinan offcut lines. Custom sizes, strand counts and drill specifications are quoted per specification and lot; exact quantities and lead times are confirmed on request.

FAQ

What bead sizes are standard for agarwood misbaha?

8 mm and 10 mm dominate 33-bead and 99-bead misbaha production, with 12 mm for premium gifting and 6 mm for high-count strands and souvenir retail. Sizes above 14 mm require thick, heavily resined stock and are usually quoted from top grade bands only.

What is the difference between a misbaha and a mala?

A misbaha is the Islamic prayer strand, commonly 33 or 99 beads; a mala is the Buddhist and Hindu strand, most often 108 beads. The manufacturing process is similar, but strand count, separator design and tassel conventions differ by market.

Can I order custom bead diameters?

Yes. Custom diameter, shape and drill specification are normal production variables. Specify the final diameter after stabilization, because agarwood beads move slightly with humidity between production and destination.

What is the MOQ for agarwood prayer beads?

Bead quantities are quoted per specification and size mix. The material entry points are a 1 kg minimum on Qinan turning offcuts (KBS01–03) and 5 kg per grade on the Hainan raw material range, so a buyer can validate grade and cut quality before committing to a full bead run.

How do I check bead grade before ordering volume?

Ask for a sample strand cut from the shipping lot, weigh it, and compare colour continuity along the strand. Then cut one bead open to inspect resin distribution through the cross-section rather than only on the polished surface.

Are your agarwood beads suitable for Gulf religious-goods retail?

Production is halal-certified, covering all product lines, and materials are tested through CMA / CNAS / ILAC-MRA accredited laboratories. Export documentation for Aquilaria material, including CITES permits, is handled per destination.

Can beads be packed as retail-ready gift sets?

Yes. Beads can be assembled with separators and tassel and packed to your artwork, and they can be combined with 12 g oud oil or attar formats in one gift set. Packaging minimums are quoted together with the bead specification.